亚洲v欧美v国产v在线成_制服丝袜中文字幕丝袜专区_一区二区三区韩国电影_激情欧美一区二区中文字幕

我要投稿 投訴建議

思科筆試試題

時間:2022-08-07 19:47:02 筆試題目 我要投稿
  • 相關推薦

思科筆試試題

  思科公司是全球領先的網絡解決方案供應商。以下是CN人才網小編整理的思科筆試試題,希望對你有幫助!

思科筆試試題

  ip classless

  ip default-network 198.0.18.0

  ip route 0.0.0.0 0.0.0.0 198.0.18.5

  ip http server

  RTR_1#show ip route

  192.168.36.0/30 is subnetted, 1 subnets

  C 192.168.36.12 is directly connected, Serial 0/0

  192.168.60.0/24 is variably subnetted, 5 subnets, 2 masks

  C 192.168.60.24/30 is directly connected, Serial0/1

  D 192.168.60.128/28 [ 90/21026560 ] via 192.168.60.26, 00:00:57, Serial 0/1

  D 192.168.60.144/28 [ 90/21026560 ] via 192.168.60.26, 00:00:57, Serial 0/1

  D 192.168.60.96/28 [ 90/21026560 ] via 192.168.36.14, 00:00:57, Serial 0/0

  192.168.77.0/30 is subnetted, 1 subnets

  C 192.168.77.32 is directly connected, FastEthernet0/0

  C 192.0.18.0/24 is directly connected, Serial 1/0

  *S 0.0.0.0 via 198.0.18.5

  Explanation:

  Step1:

  Identify the faults in configuration on RTR_1 and RTR_2. As the SIM specifies all other inter connectivity and internet access for the existing locations of the company are working properly.

  Routing Protocols used in the SIM is EIGRP with AS 212 as provided by exhibit.

  Faults Identified:

  Wrong AS (EIGRP 22) provided at RTR_2 (New router)

  RTR_1 does not advertise the new network between RTR_1 and RTR_2 into EIGRP.

  We need to correct the above two configuration mistakes to have full connectivity

  Step2: Correcting the EIGRP AS to 212

  Wrong AS (EIGRP 22) provided at RTR_2 (New router)

  All routers that want to exchange routes within EIGRP needs to be in same Autonomous System.

  Step 2.1:

  First we need to remove the current wrong EIGRP AS 22 from Router RTR_2

  Click on Host-F to get CLI of RTR_2

  RTR_2>enable

  Password : cisco (Provided by SIM Q )

  RTR_2#conf t

  RTR_2(conf)#

  Step 2.2:

  Removing the wrong EIGRP routing process with AS 22

  RTR_2(conf)#no router eigrp 22

  The above statement removes all the EIGRP configuration configured for AS 22 .

  Step 2.3:

  Adding the correct EIGRP configuration

  Start the EIGRP routing process with AS 212

  RTR_2(conf)#router eigrp 212

  Step 2.4:

  Advertise the directly connected networks into EIGRP on RTR_2

  Fa 0/0 - 192.168.77.34

  Fa 1/0 - 192.168.60.81

  Fa 0/1 - 192.168.60.65

  RTR_2(config-router)#network 192.168.60.0

  RTR_2(config-router)#network 192.168.77.0

  RTR_2(config-router)#no auto-summary

  RTR_2(config-router)#end

  Step 2.5:

  Important save the changes made to router RTR_2

  RTR_2#copy run start

  Step 3:

  RTR_1 does not advertise the new network between RTR_1 and RTR_2 into EIGRP.

  Click on Host-G to get CLI of RTR_1

  The network 192.168.77.0 is used between RTR_1 Fa0/0 - RTR_2 Fa 0/0

  This network needs to be advertise into EIGRP routing process at RTR_1

  RTR_1>enable

  Password : cisco (Provided by SIM Q )

  RTR_1#conf t

  RTR_1(conf)#

  Step 3.1:

  Enter EIGRP routing process for AS 212

  RTR_1(conf)#router eigrp 212

  Step 3.2:

  The network 192.168.77.0 is used between RTR_1 Fa0/0 - RTR_2 Fa 0/0 . Advertise this network into EIGRP

  RTR_1(config-router)#network 192.168.77.0

  RTR_1(config-router)#end

  Step 3.3:

  Important save the changes made to router RTR_1

  RTR_1#copy run start

  Verification:

  From RTR_2 CLI

  ping RTR_1 Serial 1/0 IP address 198.0.18.6

  RTR_2#ping 198.0.18.6

  !!!!!

  A successful ping shows the new RTR_2 will have full connectivity with other routers.

  Any Questions are welcomed!!!!!

【思科筆試試題】相關文章:

思科銷售類筆試題09-26

HTC筆試題09-26

網易筆試題09-26

雅虎筆試題09-26

畢馬威筆試題09-26

精選Java筆試題09-26

尼爾森公司筆試題09-26

寶潔公司筆試題09-26

人事專員筆試題09-26

網絡推廣筆試題09-25